Coban GPS TK 103 locator: how to install and configure

Who I am
Marie-Ange Demory
@marie-angedemory
EXTERNAL REFERENCES:

vgr.com gamedesigning.org Reddit.com

Author and references

Today there are many methods with GPS to help us recover our stolen devices, but today we will talk specifically about the Coban Tracker tk103 locators, both information and what? Also how to install and configure it? It's not that complicated, you just have to pay some attention in each of the steps.

What is GPS TRACKER TK103?

It is a system of satellite positioning portable, which does not allow to have different functions of safety, positioning, surveillance control, emergency alarms and a complete monitoring of the same.



This new product has a really small and compact size, which makes it really easy to use and handle. Basically for the cure and the monitoring car , which is ideal if you have a flexible Amazon job title.

Also in this product there is compatibility with options SMS / GPRS / data transmission over the internet , so that in this way the monitoring carried out is really correct.

Main parts that make up the Coban Tracker TK 103 GPS

The Coban Tracker TK 103 GPS is a compact system with which you can establish various security and surveillance functions for your vehicle. That consists of a slot for inserting a SIM card and a slot to insert a Micro SD memory card.

Motion sensor socket and microphone jack socket, plus a microUSB connection to charge the battery. We can also find various connections for accessories and the socket for the GSM antenna, we will also find several signaling LEDs and a switch to use the backup battery .


Add-ons included for GPS

In addition to these components, the Coban GPS Tracker TK 103 includes other accessories such as 3 meters of GSM antenna cable . One Harnees 10 pin, 1,5 meter microphone cable, 12V / 40A or 24V / 40A relay. All this in order to be able to make the various connections to your vehicle by yourself and be able to use the system.


External accessories

In return, you will receive other important accessories to be able to start the surveillance and security system of your vehicle. Among these we can mention the remote control, the vibration sensor and the GPS antenna cable.

MicroSD card

Il sistema GPS Coban Tracker TK 103 offers you the possibility to insert a MicroSD memory to be able to record relevant data such as your location. In cases where there is no signal from the GSM network. Included in addition to purchasing your GPS, this card has a capacity of 2GB.

Steps to properly connect the Coban Tracker TK103 GPS to a vehicle

In order to install or connect this equipment in any car the following steps must be followed to the letter.

Installations in the electrical system of your car

Yes, as the title says, in order to use this equipment it must be connected to the car's electrical network, and to achieve this you must do the following:

  1. The first thing to do is to insert correctly il wiring with each of the assigned connections.
  2. Now the wire that has a red color has to be connected to the motor assignment and the yellow wire has to be connected to the other end which has been completely alone.
  3. In this way, the supply current of the automotive fuel pump has already been determined. In the wiring there are red and black cables, they are the cables dedicated to the power supply of the car.
  4. This red wire must be connected directly to the positive of your car , while the black wire must be connected directly to the negative wire of your car.
  5. The cables dedicated to the SOS button or the panic button, on the other hand, must be installed directly in the appliance.
  6. Now you need to connect the blue wire, to have a negative door open connection, while the green wire is for a positive door open connection.
  7. In this way, when you open any door of your car, the alarm siren will be activated.
  8. Now the white cable must be connected to that of the Switchera, while the orange cable must be connected to the positive of the siren.
Read What are the differences between ethical objectivism and ethical subjectivism? - Examples

Installing the SIM card

When buying a SIM card for these cases, you need to make sure it can view calls and that too does not have a pin code . Now the SMS must be in TXT format, as unfortunately it cannot recognize PDUs.



Now all you have to do is press the button to extract the tray and insert the SIM card into it, once this is done, just press it carefully to position it.

Power cord

It is necessary to connect the red and black wires of 12 Vts or 24 Vts, with the car's power supply system. So that's enough turn on the equipment in the on / off switch. Where a red LED will light up, it will flash and then stay on.

GPS activation

You have to send the message 'begin + password' to the unit and it will give you the answer 'begin ok' in this way all the configurations of the equipment are activated. The password that is commonly provided by default on these computers is 123456

For example, you have to send the SMS in the following way 'begin123456', as you will see that the plus sign is not included and you must not include the quotes.

To change this password you have to send 'password + old password + space + new password', a clear example of this would be 'password123456 666666' and in response to this message you will be told 'password ok', everything is fine. If you have more questions, you can visit the official manual.

Use of GPS SMS SMS tracking commands

When you use the GPS system to locate or know the position of your vehicle. You need to use the commands, which are sent via SMS messages and to get started you need to send the following message 'begin123456'. It's important always write messages in lowercase and the numbers refer to the password or key that the system brings from the factory.


Read How to Force User to Enable Macros Easily in Excel (Example)

Therefore to start using the GPS, you need to send a text message with the word begin + the factory password. You can change your password if you wish, but yes advises not to do this to avoid possible system errors . When sending the text message, you will receive the reply of the same 'start ok'.


Once you have registered your phone number you can send the following command to receive the exact location of where your vehicle is. You must then send the command 'fix060m005n123456' e you will receive the longitude and latitude in response . This will be done automatically by the system 5 times every hour.

Commands for locating the vehicle in the GPS

The commands you will use with yours Coban GPS Tracker surveillance and localization system they are very few and easy to use and are the following:

  • 'begin123456' With this command you can start and program the system
  • 'admin123456 + phone number' With this command the phone number is set as the main one
  • 'fix060m005n123456' With this command you will automatically receive the position every hour 5 times in a row
  • 'fix060s *** n123456' With this command you will receive the position of your vehicle every 60 seconds

Coban Tracker TK 103 GPS Tracking Mode

The Coban Tracker TK 103 GPS uses two vehicle tracking modes, the Tracker mode and Monitor mode or internal monitoring . Which you can use at any time and change modes by sending an SMS.

Tracker mode

This mode is the one that is provided by default in your GPS monitoring system in case you have changed the mode to internal monitoring. And reset the text messages, you just need to send the message "tracker123456" remember that the digits 123456 is the factory password. You will then receive a "tracker ok" message that confirms that Tracker mode has been activated .

Internal monitoring

In case you want to activate Internal Monitoring or Monitor Mode e listen to everything that is spoken inside the vehicle . You must immediately send the message 'monitor123456' you will receive an SMS with the following message 'monitor ok'. This way you will know that monitor mode has been activated.

Other functions you can use in GPS Tracker

The GPS Tracker allows you to take advantage of other very useful functions for know the general status of both the system and that of your vehicle . For this it will only be necessary to send the following command 'check123456'. You will then receive an SMS which will offer you a report on the status of the system and your vehicle at that time.

Read Add anyone to your WhatsApp, regardless of country

Another extra feature you can use with the GPS Tracker system is receive speed warnings when it exceeds a preset parameter . For example if you want to receive a message when your vehicle exceeds 100 km per hour. You just have to send the following command 'speed123456 100'.

Time zone

Each country has a time zone and for configure the system based on the geographic area in you live, you need to know which number corresponds to your country. For example, in case you live in Mexico, you have to send the following message 'time zone123456 6', the number 6 corresponds to the time zone of Mexico.

IMEI check

The GPS system will also provide you an IMEI code to be able to register on the official website . To receive this code it is necessary to send a command with the following message 'imei123456'. The system will reply immediately with a text message containing the IMEI message and 15 consecutive digits, this is the code you need to register.

Alarm system

Another way that GPS has for protecting your vehicle is through the alarm system and by sending the 'arm123456' command this alarm will be activated. And you will get a text message with the following reply "Tracker activated" so if your vehicle is parked and the doors are open, the alarm will sound and you will get a "door alarm + lat / lon" message.

This alarm will sound every 3 minutes and the same will happen in cases where your vehicle receives a hit or motion is detected by the sensors. L' alarm will go off also when starting the engine or activating the ignition switch of the vehicle .

Common errors and solutions to the GPS tracker 103

Like any electronic system, this too can have defects that prevent us from using it correctly. And so it's important that you know what they are the most common problems and how you can solve them alone at any time.

The first has to do with not receiving replies when sending a message to configure the system. This mistake or failure can be mainly presented by the use of a wrong command . And not because of system errors, so they have to make sure that the command you use is spelled well and that the spell checker on your mobile hasn't accidentally changed it.

Another very frequent problem occurs when calling the GPS, but for some reason the call is not finished and the message with the location is not received either . This failure is usually due to the phone number not being registered in the GPS, as the system will not answer or allow calls from mobile devices that have not previously been registered.

Audio Video Coban GPS TK 103 locator: how to install and configure
add a comment of Coban GPS TK 103 locator: how to install and configure
Comment sent successfully! We will review it in the next few hours.